Railgate Series: High-Cycle

Flatbed and Van - Railgate Series: High-Cycle
Model 85-30 TP48


85-30 TP48


Flatbed and Van



Platform Detail:


1-piece treadplate steel w/ 48" loading depth + 12" taper

Drive System:

Leaf Chain and Hydraulic Cylinder

Hydraulic System:

Enclosed Unit: All critical components are factory enclosed in main frame of gate providing protection from elements and damage. Easy access for servicing. Pressure Relief Valve: Prevents operator from overloading the platform. Cylinder-Mounted Flow Control Valves: Prevents uncontrolled descent of platform

Electrical System:

Control Unit: Moisture resistant toggle switch deactivates 90 seconds after last operation (helps prevent unauthorized use) / timer reset and on-off button permanently and conveniently located on control unit and positioned under logo and bulls eye respectively. Circuit Breaker: 200 Amp Continuous, 3000 Amp Interrupt, 30 VDC, Watertight, Manual Reset. Mounted in-line with 2 AWG positive battery cable, protects vehicle in the event of an electrical short. Power/Ground Cable: Factory supplied 2 AWG ground cable molded with power cable, providing a direct connection from liftgate to truck battery. Insulation rated for -40°C (-40°F) to 105°C (221°F).

Drive Train:

Leaf Chain (ANSI #BL534), Steel Slider assemblies with steel rollers and dual-sealed ball bearings.


Safety Trip Bar: The standard Safety Trip Bar, located below the railgate's enclosed hydraulic and electrical systems, will immediately stop the upward movement of the platform if any object is detected between the platform and the liftgate frame.

Download PDF Spec
  Find a Dealer