Liftgate Specification

Model:

72P-1036 EA39

Application:

Cargo Van

Capacity:

1000

Platform Detail

Aluminum

Two-piece Extruded Aluminum w/ 39" loading depth + 6" taper

Drive System:

Wire Rope and Hydraulic Cylinder

Hydraulic System:

Enclosed Unit: All critical components are factory enclosed in main frame of gate providing protection from elements and damage. Easy access for servicing. Pressure Relief Valve: Prevents operator from overloading the platform. Cylinder Mounted Flow Control Valves: Prevents uncontrolled descent of platform.

Electrical System:

Control Unit: Moisture resistant toggle switch / deactivates 90 seconds after last operation (helps prevent unauthorized use) / timer reset and on-off button permanently and conveniently located on control unit and positioned under logo and bulls eye respectively. Circuit Breaker: 150 Amp Continuous, 3000 Amp Interrupt, 30 VDC, Watertight, Manual Reset. Mounted in-line with 4 AWG positive battery cable, protects vehicle in the event of an electrical short. Power/Ground Cable: Factory supplied 4 AWG ground cable molded with power cable. Providing a direct connection from liftgate to truck battery. Insulation rated for -40°C (-40°F) to 105°C (221°F).

Drive Train:

Wire Rope: Domestic USA 7/32" (5.6 mm). Parallel Arm Pins: 3/4" (19mm) OD Steel Round. Parallel Arm Pin Grease Zerks: Threaded straight with check ball.

Safety:

Curb-side Fixed Control: Timer deactivates 90 seconds after last operation (helps prevent unauthorized use). Pressure Relief Valve: Prevents operator from overloading the platform.

Tommy Gate Liftgate Specification: 72P-1036 EA39