Liftgate Specification

Model:

80-1050 BG34

Application:

Flatbed and Van

Capacity:

1000

Platform Detail

Aluminum

One-piece steel bar grate w/ 34" loading depth + 6" taper

Drive System:

Wire Rope and Hydraulic Cylinder

Hydraulic System:

Enclosed Unit: All critical components are factory enclosed in the main frame of gate providing protection from elements and damage. Easy access for servicing. Pressure Relief Valve: Prevents operator from overloading the platform. Flow Control Valve: Prevents uncontrolled descent of platform.

Electrical System:

Control Unit: Moisture resistant toggle switch/deactivates 90 seconds after last operation (helps prevent unauthorized use)/ timer reset and on-off button permanently and conveniently located on control unit and positioned under logo and bulls eye respectively. Circuit Breaker: 150 Amp Continuous, 3000 Amp Interrupt, 30 VDC, Watertight, Manual Reset. Mounted in-line with 4 AWG positive battery cable, protects vehicle in the event of an electrical short. Power/Ground Cable: Factory supplied 4 AWG ground cable molded with power cable. Provides a direct connection from the liftgate to the truck battery.

Drive Train:

Wire Rope: Domestic USA 5/16" (7.9 mm). Parallel Arm Pins: 7/8" (22mm) OD Steel Round. Parallel Arm Pin Grease Zerks: Threaded straight with check ball.

Safety:

Curb-side Fixed Control: Timer deactivates 90 seconds after last operation (helps prevent unauthorized use). Pressure Relief Valve: Prevents operator from overloading the platform.

Tommy Gate Liftgate Specification: 80-1050 BG34